In the course of reporting this story, I learned about the next likely record-breaking Star Wars action figure–an even rarer Boba Fett prototype to be offered in a Hake’s auction that opens on October 15, 2019, and closes on November 6 and 7, 2019. That prototype could sell for as much as $200,000. You will see mentions of that toy, as well as pictures, woven into this article.
What you see: A circa 1979 Star Wars Boba Fett rocket-firing prototype, unpainted, with the L-slot configuration. It comes with a letter from Collectible Investment Brokerage (CIB) assigning the encapsulated toy an 85 (NM+) grade. It sold at Hake’s in July 2019 for $112,926–a new record for any Star Wars toy, and the first time a Star Wars toy has crossed the six-figure threshold at auction.
The expert: Alex Winter, President of Hake’s.
How often do late-1970s Star Wars prototype toys come to auction? What others have appeared? Prototypes for action figures are much more layered than for other things. They go through various stages, various color treatments. That’s why there’s so many Boba Fett prototypes. Only a handful have been at auction. It’s still fairly uncommon for them to come up. We happen to have had the luxury of two back to back, and one coming up. [Scroll down for news on the Boba Fett prototype that’s coming up.]
When I hear “prototype” I assume there’s just one, but you’re telling me that action figures require more than one. What number of prototypes is more typical for an action figure? Three to five? I think so. There’s a few for every figure. Boba Fett went through stages of the rocket-firing figure because it had a spring-loaded mechanism. They had to get it right, so more prototypes had to be produced.
Do we know how many Boba Fett prototypes exist? It’s all very vague and speculative, but there’s a very good article that has an accurate lineage of the Boba Fett action figure. [The 2016 story suggests that maybe 100 Boba Fett prototypes exist: about 80 of the L-slot variety, and 19 of the later J-slot version. The letters describe the shape of the rocket-firing mechanism built into Boba Fett’s backpack.]
Could you talk a bit about this rocket-firing Boba Fett toy, and why it’s legendary? It’s taken on a life of its own. Kenner documented what it was supposed to be and put it all into motion before realizing it was not going to work. [As described in the previously given link, the rocket-firing Boba Fett toy was touted in a winter 1979 Kenner catalog as free with four proofs of purchase of other Star Wars toys. Kids gathered the material, sent it off to Kenner, and waited six to eight weeks for the prize to arrive, only to discover that the much-celebrated rocket was fixed in place.] I was eight when Star Wars came out. I saw the original run and sent away for the Boba Fett figure. I don’t remember being disappointed, but everyone got a fixed rocket. Other kids could have been disappointed.
This prototype is an example of the L-slot version of the toy. There was also a J-slot version. What is the significance of the slot configurations? The L-slot is the first version [of the rocket-firing mechanism]. It was very touchy–tap the figure, and it fired. The J-slot version made it a little more difficult to fire the rocket, but there was a problem. A piece of plastic could snap off that was very sharp, and could puncture [a kid’s] finger. Because they had already advertised it [as a rocket-firing toy], my guess is when they got to the deadline for when they were going to ship, they said, ‘Let’s just mount the rocket in place and get it out of here.’ [Another factor that might have led Kenner to fix the rocket in place] was a kid had choked to death on a rocket from a Battlestar Galactica toy. That could have been the reason for it. [A rocket-firing toy] sounds like a great concept, but it didn’t work. Kids got a stationary version in the mail.
This figure is unpainted. What’s the significance of that? Is it just further proof that it’s a prototype? This shows you the progression. With action figures, you go through so many stages until you get it right. Because they were still working out the firing mechanism, it was not painted. In the process, the concern is that the figure looks right, then making sure that the rocket works, and then they paint it in the final stages. It [the lack of paint] is a signpost.
Is this toy on a blank card? It’s encapsulated in plastic, in an acrylic case.
How did you set the estimate of $75,000 to $100,000? Was that the first time you’d given a Star Wars toy an estimate that includes a six-figure sum? It’s the second time. The first time was the Obi-Wan. It just got into that estimate. We based the estimate on what other Boba Fetts have sold for.
What’s the difference between this Boba Fett and the Obi-Wan Kenobi that set the record in November 2017? Is it down to one being a prototype and the other being a production toy? That’s really the big difference–one is a prototype and one is a production toy. Very few Obi-Wan have ever come to auction and sold. It’s probably a toss-up which one has fewer in existence.
The world auction record for a Star Wars toy broke three times from November 2017 to now–between the Obi-Wan and this Boba Fett prototype, you offered a different Boba Fett L-slot prototype in March 2018 that sold for more than $86,000. Why is there such strong movement in Star Wars toys now? Why has the record broken three times in less than two years? Five years ago, it [the Boba Fett prototype] was a $25,000 figure. Star Wars collectors are serious, and a lot are of the age where they have disposable income. It’s in the last five years or so that it’s been elevated to the level that it is.
The sale of this Boba Fett marks the first time any Star Wars toy has sold for more than $100,000. Could you discuss the significance of that? And did that milestone come when you expected it to come, or was it a little early, or a little late? The first comic book, the first baseball card, and the first original comic artwork breaking six figures was big news. This getting over $100,000 is a big deal, and a long time coming. A lot of that is [due to] third-party authentication. Other collectibles that have been encapsulated [sealed in plastic] have set the guideline for how the market is trending. That’s why we’re seeing what we see. As for the timing of the six figures, we had thought the Obi-Wan could do that. If it was one grade higher, it certainly would have. It’s trending upwards, as all Star Wars toys are. Collectors are there, and they’re ready and willing to pay what they have to.
What was your role in the auction? I tend to stay off the phones if I can. It’s all Internet bidding or phone bidding. I was monitoring things to make sure everything was running smoothly. I watched the whole auction unfold in front of me.
Did you have a dedicated screen for this Boba Fett lot? I have to watch the entire auction at once. It’s important that I watch everything unfurl.
That sounds tricky. I’ve been doing it for 34 years. But it’s hectic, for sure.
When did you know you had a new world auction record? We had a lot of activity for all three weeks online, to closing. On closing day, the Boba Fett prototype was around $85,000 with premium, which would have been $1,000 under the record. Even if we’d closed at that, we’d be happy, because it was right up to where the other sold. It came down to the wire. We got a bid at 9:19 pm, and that reopened the clock.
It reopened the clock? When you bid on an item, it resets the clock for 20 minutes.
So it extends the bidding life of the lot? Correct. When this was still going, much of the rest of the auction was over. It took to the very end until we eclipsed the record. It was a bit unnerving. A lot of people waited until the last minute, but that doesn’t work with us. We’re not eBay. There’s no sniping.
The Boba Fett sold for just under $113,000. Were you surprised by that? No. No. If it was twice its estimate, I would have been surprised, but it was just over the estimate. We were very pleased, but I wouldn’t say we were surprised.
And I understand Hake’s has another Boba Fett prototype coming up in November 2019 that could break the world auction record for any Star Wars toy again? This is the J-slot, the next version of the firing mechanism. It’s painted, and its grade is 85+. It’s the same grade [as the current record-holder], but it’s more desirable because it’s a J-slot, of which there are fewer. It looks like the one that was released.
Do you have an estimate on that upcoming Boba Fett prototype? I haven’t committed to one yet. It literally showed up one day after the [July 2019] auction. It could be $100,000, it could be $200,000. It could beat the record substantially, based on what it is. It’s the more desirable of the two [styles] of rocket-firing mechanisms, it’s painted, and it appears in Star Wars collectibles reference books.
What did Kenner learn from the Boba Fett disaster, if anything? It changed the toy industry dramatically. After that, people were cautious and didn’t want to be sued [over a potential choking hazard]. [The toy industry] moved into a different era.
So it wasn’t just overpromising and underdelivering, it was eek, kids could die. Yep. They made sure every base was covered so nothing would come back on them. Now it’s obvious that a tiny piece of plastic that launches with great force was not the smartest [idea]. But it all led up to this legendary status for the rocket-fired Boba Fett.
How to subscribe to The Hot Bid: Click the trio of dots at the upper right of this page. You can also follow The Hot Bid on Instagram and follow the author on Twitter.
Hake’s is on Twitter and Instagram.
Images are courtesy of Hake’s.
Alex Winter also spoke to The Hot Bid about a 1939 copy of Batman’s comic book debut, which ultimately sold for almost $570,000.
I also wrote a piece about record-setting Star Wars action figures for the Field Notes section of the October 2019 issue of Robb Report.
Would you like to hire Sheila Gibson Stoodley for writing or editing work? Click the word “Menu” at the upper right for contact details.